From Ore in the Ground to Refined Metal

Mechfort Mining & Metallurgy

Mechfort Mining & Metallurgy delivers integrated engineering across the complete mineral value chain — mine execution, mineral processing plant design, and advanced metallurgical extraction — with full environmental compliance at every stage.

Geochemical Testing
Mining Execution
Mineral Processing
Extractive Metallurgy
Pure Refined Metal
Our Capabilities

Four Disciplines, One Integrated Division

We engineer the entire mineral-to-metal pathway — from geochemical assaying and mine execution through processing plant commissioning to final metal extraction and refining.

01 — Mining

Mining Execution

We plan and execute mining operations across open-pit, underground, and placer methods. Our scope spans geological assessment, extraction planning, drilling and blasting, equipment deployment, and responsible site rehabilitation — all in full compliance with environmental protection regulations and international mine safety standards.

Open-PitUndergroundPlacerIn-Situ Leaching
02 — Processing

Mineral Processing & Plant Design

We engineer and commission mineral processing plants from feasibility study through to full commissioning. Every plant is designed to the specific mineralogy, ore grade, and throughput requirements of the project. Our process engineers cover the complete comminution and separation circuit from run-of-mine ore to saleable concentrate.

Crushing & GrindingFlotationGravity SeparationThickening
03 — Metallurgy

Extractive Metallurgy

Our metallurgical engineers apply pyrometallurgical, hydrometallurgical, and electrometallurgical techniques to extract and refine pure metals from ore concentrates with high recovery efficiency and minimal process losses. We engineer extraction circuits from concentrate feed through to refined metal product at commercial purity grades.

PyrometallurgyHydrometallurgyElectrometallurgy
04 — Testing

Geochemical Assay & Metallurgical Testing

Independent ore characterisation, geochemical assaying, and metallurgical testwork — from exploration drill core through to process flowsheet validation. We provide the analytical data that underpins resource estimation, plant design, and grade control at every stage of the mine lifecycle.

GeometallurgyGeochemical AssayBeneficiation TestingOn-Site Laboratory
Mining Execution

Mine Planning to Site Rehabilitation

We execute the full mining lifecycle — from initial geological assessment and mine design through active extraction and final environmental close-out.

Mining Methods
  • Open-Pit Mining — Large-scale surface extraction for shallow, disseminated ore deposits. Optimal for copper porphyry, iron ore, bauxite, and low-grade gold.
  • Underground Mining — Shaft and drift development for high-grade, deep ore bodies. Applied to gold veins, zinc-lead sulphides, chromite, and platinum group metals.
  • Placer Mining — Alluvial and fluvial recovery of native metals and heavy minerals from unconsolidated sediments. Used for alluvial gold, gemstones, and tin.
  • In-Situ Leaching — Solution injection into the ore body for selective mineral dissolution and surface recovery. Applied to copper, nickel, and soluble mineral deposits.
Execution Scope
  • Geological site assessment and resource estimation
  • Mine planning, pit optimization, and scheduling
  • Drilling, blasting, and load-and-haul management
  • Dewatering and ventilation systems
  • Tailings management and waste rock disposal
  • Environmental monitoring and compliance reporting
  • Progressive and final site rehabilitation
  • Equipment procurement and maintenance programs
Extractive Metallurgy

Three Extraction Pathways

We engineer metallurgical extraction circuits matched to ore mineralogy and target metal — selecting and integrating the right method or combination of methods for maximum recovery at the lowest cost.

High-Temperature Processing

Pyrometallurgy

Extraction and refining of metals through high-temperature thermal processes. Ore or concentrate is subjected to roasting, smelting, or converting to reduce metal compounds to their pure metallic state, with slag separation and further fire refining.

Roasting — oxidation of sulphide minerals to oxide form prior to smelting
Smelting — reduction of metal oxides to molten metal in a furnace
Converting — blowing air through molten matte to remove sulphur and iron
Fire refining — removal of dissolved impurities from molten metal
Target Metals
IronCopperLeadZincNickelTin
Aqueous Chemical Processing

Hydrometallurgy

Recovery of metals from ore or concentrate by selectively dissolving them into aqueous solution, then concentrating and recovering the metal through precipitation, solvent extraction, or electrowinning. Preferred for low-grade and oxidized ores.

Leaching — acid, alkali, or cyanide dissolution of target metals from crushed ore
Solvent extraction — selective transfer of metal ions into organic phase for purification
Precipitation — chemical reduction of dissolved metal to solid form
Ion exchange — resin-based selective metal capture and stripping
Target Metals
GoldCopperZincCobaltAluminium
Electrochemical Processing

Electrometallurgy

Use of electrical energy to deposit or purify metals from solution or molten electrolyte. Electrowinning deposits metal directly from leach solution onto cathodes; electrorefining dissolves impure metal anodes and re-deposits pure metal, achieving commercial and high-purity grades.

Electrowinning (EW) — direct deposition of metal from pregnant leach solution onto cathode
Electrorefining (ER) — dissolution and re-deposition to remove trace impurities from blister metal
Fused salt electrolysis — electrolysis of molten metal halide salt for reactive metals
Target Metals
CopperAluminiumZincGoldSilverNickel
Mineral Processing Plant Design

Turnkey Processing Plant Engineering

From ore characterization to full plant commissioning — we deliver complete mineral processing facilities designed around the specific mineralogy, throughput, and recovery targets of each project.

1

Ore Characterization & Testwork

Representative ore sampling, mineralogical analysis, comminution testwork (Bond work index, SAG mill test), and bench-scale metallurgical testing to establish the processing route and expected recoveries.

2

Process Flowsheet Development

Selection and optimization of the full processing circuit — comminution, classification, concentration, and tailings management — with mass balance and water balance calculations.

3

Plant Engineering & Design

Detailed engineering of all plant systems: crushing and grinding circuits, flotation banks, gravity concentrators, thickeners, filters, reagent dosing, tailings dam design, and utilities.

4

Procurement & Construction

Equipment specification, vendor selection, and procurement management. Civil, structural, mechanical, and electrical construction supervision to design specification.

5

Commissioning & Ramp-Up

Cold and hot commissioning, process optimization during ramp-up, and operator training to achieve nameplate throughput and recovery within the project schedule.

Comminution
Jaw, cone, and gyratory crushing
SAG, ball, and rod milling
High-pressure grinding rolls (HPGR)
Wet and dry screening circuits
Concentration
Sulphide and oxide flotation
Gravity separation (spirals, jigs, shaking tables)
Dense medium separation (DMS)
Magnetic and electrostatic separation
Solid–Liquid Separation
High-rate and high-compression thickeners
Ceramic and belt vacuum filtration
Counter-current decantation (CCD) circuits
Tailings Management
Conventional, thickened, and paste tailings
Filtered dry-stack tailings facilities
Tailings dam design and geotechnical review
Geochemical Assay & Metallurgical Testing

Laboratory & Field Analytical Services

We provide independent geochemical assaying, mineralogical analysis, and metallurgical testwork at every stage of the mine lifecycle — from first-pass exploration sampling through to full plant flowsheet validation and on-site grade control.

Geochemical Assay & Mineral Analysis

Exploration Geochemistry & Assaying

Elemental concentration determination of drill core, rock chips, soil, and stream sediment samples for resource estimation and mine grade control.

Fire Assay (Au, Ag, PGMs)Fusion cupellation for precious metals — lowest detection limits available
ICP-OES / ICP-MSMulti-element analysis for base metals, trace elements, and REEs
XRF (X-Ray Fluorescence)Rapid major-element and bulk-ore composition screening
QEMSCAN / MLAAutomated mineralogy for mineral identification, liberation, and locking
Acid Mine Drainage TestingAcid-base accounting (ABA) and NAG tests for waste rock classification
Mineral Processing & Beneficiation Testing

Process Flowsheet Development

Bench-scale and pilot-scale testwork to establish the optimal processing route — separating valuable minerals from gangue at maximum recovery and minimum reagent cost.

Comminution TestworkBond Ball / Rod Work Index, SAG mill (SPI/SMC), HPGR testing, and size-by-size analysis
Flotation TestworkRougher, cleaner, and locked-cycle tests to optimise reagent suite, grind size, and circuit configuration
Gravity Concentration TestsKnelson concentrator, shaking table, and spiral testing for native gold, tin, and heavy minerals
Leach TestworkColumn and bottle-roll leach tests for heap-leach feasibility; agitation leach kinetics for CIL/CIP design
Thickening & Filtration TestsSettling rate, Kynch analysis, and vacuum / pressure filtration tests for tailings and concentrate dewatering design
On-Site Analytical Services

Mine-Site Laboratory Services

Rapid turnaround on-site analysis for real-time grade control and plant optimisation — eliminating the lag of off-site dispatch during active mining.

▸
Grade Control Sampling & Assaying
Blast-hole, channel, and face sampling with same-shift turnaround. Direct feed to mine planning for ore-waste boundary decisions at the working face.
▸
Process Streams Monitoring
Feed, concentrate, tailings, and solution assaying at defined sample intervals — enabling metallurgical accounting and prompt response to recovery deviations.
▸
Laboratory Setup & Management
Full specification, procurement, installation, QA/QC protocol development, and ongoing management of mine-site laboratory infrastructure.
Environmental Responsibility

Compliance Built Into Every Stage

Environmental protection is not an add-on — it is engineered into our mining execution and plant design from the first day of site assessment.

Environmental Impact Assessment

Comprehensive EIA conducted prior to any extraction activity, covering air quality, water resources, soil, biodiversity, and social impact in full compliance with Pakistan EPA and international IFC Performance Standards.

Water Management

Closed-circuit water management with process water recycling, effluent treatment, and zero-discharge design principles. All process effluent is treated to regulatory discharge standards before any release.

Reagent & Chemical Control

Safe handling, storage, and secondary containment for all process reagents. Cyanide management under ICMC Code. Acid mine drainage prevention and neutralization systems designed into every tailings facility.

Site Rehabilitation

Progressive and final site rehabilitation plans prepared and bonded at project outset. Revegetation, landform restoration, and long-term environmental monitoring programs executed to international closure standards.

4
Service disciplines — mining, processing, metallurgy, testing
3
Metallurgical extraction methods — Pyro, Hydro, Electro
5
Turnkey plant delivery phases — from testwork to commissioning
10+
Target metals across all extraction pathways

Enquire About a Mining or Metallurgy Project

Our team of mining engineers and metallurgists is ready to assess your ore deposit and design the right extraction solution — from pre-feasibility through to full plant commissioning.

  • Mining Execution
  • Mineral Processing
  • Extractive Metallurgy
  • Assaying & Testing

Mechfort Mining & Metallurgy operates under Mechfort (Private) Limited, Islamabad, Pakistan (CUIN 0322877). Contact us at mining@mechfort.com or through our online inquiry form.

Send us an inquiry about your project.

Contact us